acceed: industrial switch with PoE and M12 according to EN 50155

The industrial switch TGPS-1080-M12 has eight 10/100/1000Base-T(X) interfaces realised as M12 connectors. The switch meets the requirements in accordance with EN 50155 for electronics in rail vehicles and can therefore withstand the tough requirements regarding the ambient temperature, humidity, soiling, vibration, voltage fluctuation, cooling and electromagnetic compatibility.

The ORing switches which are certified in accordance with EN 50155 are developed for the most stringent industrial requirements and designed for robust continuous operation in harsh environments with changing environmental conditions. Typical areas of application include rail vehicles, construction vehicles, driverless transport systems as well as further rail, transport and logistics applications. However, with their extremely high reliability and robustness they are also preferred for use for demanding stationary applications in industrial environments.

The industrial switch TGPS-1080-M12 has eight Ethernet interfaces with Power-over-Ethernet (PoE) and these are realised as waterproof M12 connectors. Four of these interfaces (two pairs) are redundant bypass connectors, thus meeting the specific requirements pertaining to failure safety from the European Standard EN 50155. Thanks to the PoE function, which provides 60 or 120W via the network cables depending on input voltage, a separate power supply for the devices connected is not necessary, making additional safety possible due to the omission of cables.

When in operation, a broad ambient temperature range from -40 to +70°C is permissible. The full metal housing has the dimensions 125 x 65 x 196 mm. The dual voltage input for 12 to 57V DC has overvoltage protection. A relay output (5-pin, A-coded) with 3A capacity is also realised as a waterproof M12 connector. Three LEDs signalise readiness for operation and warn at both voltage inputs in case of failure.

More Information...

Latest News from ACCEED

Acceed: energy-saving gateway to IIoT offers a variety of wireless interfaces
acceed: dual 4G LTE router with waterproof sockets
acceed: Modbus/TCP module for 3 temperature sensors
acceed: industrial switch with PoE and M12 according to EN 50155
Acceed: graphics power for industrial applications

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...