Rutronik: latest PIC MCU family and development board available

With the PIC16F15386 family, distributor Rutronik presents the most powerful launching point into the 8-bit PIC microcontroller portfolio from Microchip. In addition to Microchip’s current Core Independent Peripherals (CIPs), this new family includes a high-accuracy 32MHz internal oscillator and memory features such as Memory Access Partition with bootloader-friendly write-protection to prevent accidental over-write. The PIC16F15386 family is suitable for a broad range of general purpose and low-power applications.

The scalable PIC16F15386 family offers up to 28KB Flash and 2KB RAM in 8- to 48-pin package options. It is the first 8-bit PIC MCU family to offer the 48-pin package, adding more ADC channels and I/Os. Device Information Area (DIA) offers protected storage for unique device identification and calibration values. It also offers high levels of CIP integration to perform system functions, such as signal generation, motor control, safety monitoring, system communications, and human interface, outside the core while minimizing power consumption. Offering IDLE and DOZE modes as well as Peripheral Module Disable power-management features, engineers are able to optimize the balance between power consumption and performance.

Thanks to the new family-specific Xpress series development board, projects can be started immediately: In only two minutes, engineers may start application code development with the Xpress series board and the cloud-based MPLAB Xpress IDE. The PIC16F15386 family is also supported by two curiosity boards (DM164136 and DM164137) and Microchip’s free software development platforms including MPLAB Code Configurator and MPLAB X IDE. The MCC is a free software plug-in that provides a graphical interface to configure peripherals and functions specific to an application. The PIC16F15386 family includes 13 unique products in various package options including PDIP, SOIC, DFN, UDFN, UQFN and SSOP.

Latest News from RUTRONIK

Rutronik includes Qseven module from SECO in its portfolio
Rutronik expanding in the United Kingdom
Rutronik: latest PIC MCU family and development board available
Rutronik opens subsidiary in Turkey
Rutronik: EERAM memory solution from Microchip
Rutronik presents TFT displays at embedded world
Rutronik presents demo based on Microchip SAM L22 at embedded world
Rutronik: Bluetooth Smart ICs with low current performance from Toshiba

WSI's OLED Professional innovations create more value for You.

WSI are the PMOLED manufacturer and our factory located in Chun-Nan in Taiwan. Our products are the market leader and pioneer in PMOLED module, including the monochrome, area colors and full color one...

SKIPPER UBT21 - a Bluetooth 4.0 USB serial adapter for industrial and medical use

SKIPPER UBT21 is a Bluetooth 4.0 USB serial adapter for industrial and medical use. It incorporates a Bluetooth Dual-Mode Stack, supports ranges of up to 300 meters and transferrates of 720 kbit/s (ne...

Three of a kind - Versatility based on Low Power ARM Cortex-A15

At this year's Embedded World, MEN has presented three low power, ARM Cortex-A15-based solutions on different form factors: a VMEbus SBC, an industrial box PC and a COM Express Mini module. All so...

Enabling Embedded IoT

Eurotech, a long-time leading provider of embedded systems and a global leader in IoT enablement, showed its new modules and Multi-service IoT Gateways at Embedded World 2017. The newly introduced Eu...

PLS’ UDE and new UAD2next allow more powerful trace analysis of embedded multicore systems

The new Universal Debug Engine 4.8 from PLS Development Tools offers a bunch of new and improved features for trace analysis of embedded multicore systems. With the new access device UAD2next PLS cont...

Disruptive technologies

Rahman Jamal, Global Technology & Marketing Director, National Instruments, talks about disruptive technologies in the consumer world, but also in measurement, automation, and the embedded industr...

AdaCore Announces Availability of QGen Debugger at Embedded World 2017

Jose Ruiz, technical lead at AdaCore for the company's QGen automatic code generator toolset for model-based development, discusses that product and explains what differentiates it from other prod...

SECO IoT roadmap: from the proof of concept to the market

During Embedded World 2017 Gianluca Venere, SECO Director of Global Sales, leads us to discover the company's Industrial IoT roadmap showcased at SECO's main booth, along with the latest UDOO ...

Internet of Chocolate

HCC show off an embedded chocolate vending machine using MQTT to connect to a broker in the cloud. There is an important message behind this cool demo – security and reliability of embedded soft...