Portwell: COM Express type 6 basic module for medical healthcare and retail systems

Portwell released the PCOM-B643VG, a COM Express Type 6 Basic Module based on the 7th Generation Intel Core mobile processor and Intel QM175 and CM238 express chipset. This module includes Intel Turbo Boost Technology for faster processing, Intel vPro Technology for superior remote capabilities and Intel Hyper-threading Technology for multithreading. Supporting three symmetric independent displays, the PCOM-B643VG is  an ideal solution for Medical Healthcare Systems, Retail Systems, Network Systems, Digital Signage and IoT Solutions.

The Portwell PCOM-B643VG COM Express module supports DDR4 2133MT/s SDRAM on two SO-DIMM sockets, up to 32GB; two DisplayPort, one VGA, and one LVDS output; 4x USB 3.0, 4x USB 2.0; 4x SATA III; 8x PCIe x1, 1x PCIe x16; 1x GbE; and wide voltage support from 6V to 18V. Specifically, the PCOM-B643VG COM Express module supports up to 32GB ECC (supported by CM238 chipset only) and non-ECC DDR4 up to 2400MHz on two 288-pin SO-DIMM sockets, making it faster than its predecessor. Its expansion interface supports one PCI Express x16 Gen3 (8.0GT/s) for enhanced video performance, 1.6 times faster than the previous Gen2 (5.0GT/s), and eight PCI Express x1 Gen3 (8.0 GT/s). Furthermore, PCOM-B643VG supports three independent displays, DP (DisplayPort), VGA and eDP with greater 3D performance compared to its previous generation. Operating with a low TDP CPU (25/35/45 watts), the PCOM-B643VG can deliver superior performance in various environments.

 

Latest News from Portwell

Portwell: compact embedded system ideal for kiosk, digital signage, factory automation
Portwell: palm-sized PICO-6260 offers low power and fan-less design
MEDWEL: embedded fanless system with E3900 processors for medical applications
Portwell: compact fan-less embedded system supports wide industrial temperature range
Portwell: rugged fan-less embedded system with wide voltage of power input
Portwell: COM Express 3.0 type 7 basic module with four 10GbE interfaces
Portwell: COM Express 3.0 module optimized for network appliances
Portwell: heterogeneous architecture platform for software-defined storage applications
Portwell: application focused “RS4U - Ready Solution for You” Box PCs
Portwell: flexible wireless sensor nodes for IoT applications
Portwell releases highly composable IoT gateway
Portwell: COM Express type 6 basic module for medical healthcare and retail systems
Portwell: basic COM Express module for medical healthcare, retail and IoT

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...