Mouser stocking ultra-low-power MEMS oscillators from Microchip

Mouser Electronics is now stocking the DSC6000 family of microelectromechanical systems (MEMS) oscillators from Microchip Technology. The ultra-small, ultra-low-power oscillators reduce footprint by up to 75 percent and consume up to 50 percent less power than comparable quartz oscillators.

DSC6000 are the industry’s smallest MEMS MHz oscillators with the lowest power consumption over full frequency range of 2 kHz to 100 MHz. The single-output DSC60xx and DSC61xx MEMS oscillators feature an ultra-low standby power consumption of just 12 µA. In active mode, the DSC60xx devices consume as little as 1.3 mA, and the DSC61xx devices typically consume 3.0 mA. The devices offer high stability of ±25 ppm or ±50 ppm over the industrial temperature range of minus 40 to 85 degrees Celsius.

The DSC6000 family of MEMS oscillators is suitable for use as clock references in small, battery-powered solutions that require small size, low power consumption, and long-term reliability, such as wearables and IoT devices. The AEC-Q100-qualified devices are also ideal for automotive applications, such as rearview cameras and infotainment systems.

More Information...

Latest News from Mouser Electronics

Mouser: NXP LPC546xx 32-bit MCUs and development board now shipping
Mouser: nanoPower boost converter helps extend battery life
Mouser: single-ended low noise amplifiers for RF applications
Mouser stocking ultra-low-power MEMS oscillators from Microchip
Mouser distributes Coilcraft products globally
Mouser partners with Renesas to reach global IoT marketplaces
Mouser widens breadth of Analog Devices Eval Boards
Mouser stocks TI LDC2114 inductive touch solution
Mouser: real design ideas and virtual reality tours on show
Mouser: 32-bit prototypes out of the box with PIC32MX470 Curiosity Dev Board
Mouser and SparkFun bring open source hardware to global markets
Mouser: DC-DC synchronous buck converters operate in 3.5 to 36V input voltage range
Mouser debuts simple navigation of product datasheets
Mouser: ultra-small modules for Bluetooth LE applications from Silicon Labs
Mouser: compact, ultra-low-power TC356xx Bluetooth IC controllers
Mouser: connect to the IoT faster with Microchip’s wireless modules
Mouser shipping MGM111 Mighty Gecko module for out-of-the-box mesh networking
Mouser: head-spinning virtual reality facilities tour at electronica 2016
Mouser: scalable iMOTION platform for motor drive design
Mouser stocking Cypress FM4 S6E2G-series MCUs, designed for Industry 4.0 and IoT

WSI's OLED Professional innovations create more value for You.

WSI are the PMOLED manufacturer and our factory located in Chun-Nan in Taiwan. Our products are the market leader and pioneer in PMOLED module, including the monochrome, area colors and full color one...


SKIPPER UBT21 - a Bluetooth 4.0 USB serial adapter for industrial and medical use

SKIPPER UBT21 is a Bluetooth 4.0 USB serial adapter for industrial and medical use. It incorporates a Bluetooth Dual-Mode Stack, supports ranges of up to 300 meters and transferrates of 720 kbit/s (ne...


Three of a kind - Versatility based on Low Power ARM Cortex-A15

At this year's Embedded World, MEN has presented three low power, ARM Cortex-A15-based solutions on different form factors: a VMEbus SBC, an industrial box PC and a COM Express Mini module. All so...


Enabling Embedded IoT

Eurotech, a long-time leading provider of embedded systems and a global leader in IoT enablement, showed its new modules and Multi-service IoT Gateways at Embedded World 2017. The newly introduced Eu...


PLS’ UDE and new UAD2next allow more powerful trace analysis of embedded multicore systems

The new Universal Debug Engine 4.8 from PLS Development Tools offers a bunch of new and improved features for trace analysis of embedded multicore systems. With the new access device UAD2next PLS cont...


Disruptive technologies

Rahman Jamal, Global Technology & Marketing Director, National Instruments, talks about disruptive technologies in the consumer world, but also in measurement, automation, and the embedded industr...


AdaCore Announces Availability of QGen Debugger at Embedded World 2017

Jose Ruiz, technical lead at AdaCore for the company's QGen automatic code generator toolset for model-based development, discusses that product and explains what differentiates it from other prod...


SECO IoT roadmap: from the proof of concept to the market

During Embedded World 2017 Gianluca Venere, SECO Director of Global Sales, leads us to discover the company's Industrial IoT roadmap showcased at SECO's main booth, along with the latest UDOO ...


Internet of Chocolate

HCC show off an embedded chocolate vending machine using MQTT to connect to a broker in the cloud. There is an important message behind this cool demo – security and reliability of embedded soft...