Keysight Technologies launches E-Mobility test and measurement solutions

Keysight Technologies launch a suite of test and measurement solutions for the rapidly growing battery, HEV/EV and HEMS markets. The global electric vehicle market - ranging from mild hybrids to battery electric vehicles and HEMS - are fast growing and very dynamic, with a large number of new application areas and implementation characteristics. Based on these dynamics, many cell and battery manufacturers are facing challenges to deal with the exponential demand for costly, high-power/high-voltage cells in the 300 V range. This is compared to the traditional, more cost-efficient 12 V cells.

Keysight’s suite of electric vehicle and HEMS solutions provide design and test engineers powerful, versatile and efficient solutions that will help drive their innovations to market faster, and at a lower cost.

EV1003A Power Converter Test Solution – designed specifically to address the efficiency, safety, regulatory and environmental challenges associated with the HEV/EV and HEMS markets. Currently, it’s the only commercial off-the-shelf regenerative power system with highly integrated safety features that protect operators and the devices under test.

RP7900 Series Regenerative Power System – offers battery emulation capabilities, such as 2-quadrant (source/sink) operation and programmable output resistance. In addition, the power system provides the added benefit of safely and cleanly regenerating greater than 85 percent of power back into the grid—which increases efficiency based on reduced energy consumption and cooling requirements.

BT2191A Self-Discharge Measurement (SDM) System – for cell designers, the BT2191A SDM system offers a new way to accurately measure Li-Ion cells’ self-discharge currents, within a significantly reduced amount of time and with a settling time as low as one to two hours. This new patented technique allows engineers to dramatically reduce the design cycle-time and helps to optimize self-discharge performance and characteristics of battery cells.

BT2152A Self-Discharge Analyzer (SDA) – for Li-Ion cell manufacturers, the BT2152A SDA offers a new type of analyzer that measures in parallel self-discharge currents on a large number of cells, providing a significant reduction in the time required to discern good versus bad cell self-discharge performance. This helps achieve dramatic reductions in work-in-process inventories, working capital and facility costs.

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


wholesale jerseys