Microchip: low-voltage 64-megabit serial Quad I/O SuperFlash memory

Microchip announces availability of a new 1.8V Serial Quad I/O SuperFlash memory device.  The SST26WF064C, a low-voltage 64-Megabit device, combines Dual Transfer Rate with proprietary SuperFlash NOR Flash technology, making it ideal for wireless and battery-powered applications.  DTR gives customers the ability to output data on both edges of the clock which reduces overall data access time and power consumption.  SuperFlash technology also reduces power consumption by providing the industry’s fastest erase times.  Typical chip-erase time for the SST26WF064C is between 35 and 50 milliseconds, compared to competitive Flash devices which take more than 30 seconds to erase.

The SST26WF064C also integrates a hardware-controlled reset functionality enabling a robust device reset.  Most serial Flash devices in the market do not support hardware reset function due to pin-count limitations on the package.  With this Microchip device, customers have the option to reconfigure the HOLD# pin for this reset function.

Operating at frequencies reaching 104 MHz, the device enables minimum latency eXecute-In-Place capability without the need for code shadowing on Static Random Access Memory.  The new device uses a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial Flash devices.  The SST26WF064C also supports full command-set compatibility with traditional Serial Peripheral Interface protocol.

Microchip’s high-performance SuperFlash technology also means the device is based on a proprietary split-gate Flash memory cell giving additional capabilities such as high endurance cycling of up to 100,000 erase/write cycles, data retention of over 100 years and the industry’s fastest erase times.

Developers can begin designing with the SST26WF064C Flash memory today using Verilog and IBIS models as well as device drivers. The SST26WF064C is offered in a variety of package options including an 8-contact WDFN, 8-lead SOIJ, 16-lead SOIC and 24-ball TBGA.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys