EKF: dual M.2 PCIe/NVMe SSD carrier board

EKF presents the SE2-MOOD, a powerful mass storage solution for CompactPCI Serial systems. The board is equipped with three M.2 sockets for SSD modules. Two M.2 sockets are suitable for NVMe type SSDs, while the third M.2 connector can accommodate a classic M.2 SATA style module.

Additional external storage devices such as NAS and USB drive can be attached via optional GbE and USB3 front panel receptacles. The M.2 NVMe sockets are each controlled via PCI Express x4, for a maximum data transfer rate up to 8GT/s (PCIe Gen3). The maximum NVMe M.2 module size is 22110. The third M.2 connector on the SE2-MOOD is suitable for an M.2 SATA SSD module up to the 2280 size, to be used e.g. as local backup storage solution.

More Information...

Latest News from EKF Elektronik GmbH

EKF: quad M.2 PCIe/NVMe SSD carrier board
EKF: full length XMC module carrier PCIe Gen3 x8
EKF: CompactPCI Serial 7th gen XEON E3 v6 processor CPU card
EKF: dual M.2 PCIe/NVMe SSD carrier board
EKF: eight drive SATA SSD plug-in cassette

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...