Mouser: ADuCM302x ultra-low-power MCUs for IoT solutions now available

Mouser Electronics is now stocking the ADuCM3027 and ADuCM3029 ultra-low-power microcontrollers from Analog Devices. Serving as the brain of connected solutions, the ADuCM302x series microcontrollers outperform other general-purpose processors with a high ULPBench certified score of 245.5 points, and are designed to enable longer battery life and lower operating costs in Internet of Things applications without sacrificing security and reliability.

Analog Devices’ ADuCM302x microcontrollers, available from Mouser Electronics, are powered by a 32-bit Arm Cortex-M3 processor with 128 kBytes (ADuCM3027) or 256 kBytes (ADuCM3029) of on-chip flash and 64 kBytes of SRAM with parity. Engineers can easily configure the Cortex processor to achieve the right balance of performance and power while still maintaining critical security and reliability functions.

Consuming less than 30 µA/MHz of current in active mode and less than 750 nA in standby mode, the ultra-low-power microcontrollers enable longer operation between battery replacements or recharging, providing a better end-user experience and lower maintenance cost. This efficiency can also reduce costs for device makers by decreasing the number and size of batteries required, and enables new applications where battery replacement is impractical.

The ADuCM302x devices feature a combination of hardware and software protection mechanisms that enable faster encryption and provide read-protection to prevent the device contents from being read by unauthorized users. Additionally, in-circuit write protection prevents the device from being reprogrammed with unauthorized code. Voltage monitoring in standby mode and error correction for the flash memory increase reliability by avoiding corruptions that could result in misoperation or system crashes.

The ADuCM302x microcontrollers complement Analog Devices' broad portfolio of compatible sensing and wireless communication technologies. The portfolio is supported by software and hardware development tools to help engineers optimize solutions for their unique application needs.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys