Rohde & Schwarz: new family of compact, portable test instruments for RF measurement

Rohde & Schwarz launched the R&S ZNL network analyzer and the R&S FPL1000 spectrum analyzer to offer flexible solutions for the most important RF measurements. These include the characterization of components such as antennas, attenuators, filters and amplifiers, as well as measurements on signal sources including spectral measurements, analog and digital signal demodulation and accurate power measurements.

Instruments from the new family have a footprint of just 408 x 235 mm. This saves up to 60 % of space on the workbench compared with conventional solutions. The instruments feature a large 10.1" WXGA touchscreen, providing a good overview of measurement details. The touchscreen allows users to readily set the center frequency and reference level and zoom the span or amplitude measurement range. Weighing just 6 kg to 8 kg and featuring a carrying handle and optional battery, the instruments are fully portable and can be used wherever needed.

With frequency ranges from 5 kHz to 3 GHz or 6 GHz, the R&S ZNL is well suited for various RF component measurement applications in industrial electronics and wireless communications. The R&S ZNL offers solid network analyzer performance with a dynamic range of up to 130 dB (typ.) and an output power range from -40 dBm to +3 dBm (typ.). The measurement speed is very high, for instance 16.7 ms (401 points, 100 kHz IF bandwidth, 200 MHz span, two-port calibration). Standard features include embedding/deembedding, fixture compensation, time domain measurements and support of automatic calibration units. The R&S ZNL offers even more. The instrument can be equipped with full spectrum analyzer hardware. When combined with an R&S NRP power sensor, it turns into a power meter. In this way, the R&S ZNL becomes a true 3 in-1 allrounder that can handle continually changing measurement tasks, helping research and service labs to reduce investment costs.

The R&S FPL1000 spectrum analyzer operates in the frequency range from 5 kHz to 3 GHz. It delivers solid RF performance with a typical phase noise of -108 dBc at 10 kHz offset (1 GHz carrier) and a displayed average noise level (DANL) of -167 dBm using the optional preamplifier. This performance combined with ease of use makes the R&S FPL1000 ideal for applications in the lab, production and service.

The spectrum analyzer functionality of both the R&S ZNL and the R&S FPL1000 includes a wide range of spectral measurements such as channel power, adjacent-channel leakage ratio (ACLR), signal-to-noise ratio, spurious, harmonic distortions, third-order intercept point and AM modulation depth. Versatile marker functions are also provided. With standard 10 MHz or optional 40 MHz analysis bandwidth, the instruments can analyze analog signals when equipped with the R&S FPL1-K7 option. Digital modulated signals can be characterized using the R&S VSE software and the R&S VSE-K70 option. The R&S FPL1 K30 option, in combination with an external noise source, turns both the R&S FPL1000 and the R&S ZNL into a noise figure meter.

Rohde & Schwarz will present the R&S ZNL vector network analyzer and the R&S FPL1000 spectrum analyzer to the public for the first time at European Microwave Week 2017.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz: automotive radar echo generation and radome measurements at EuMW 2017
Rohde & Schwarz: new family of compact, portable test instruments for RF measurement
Rohde & Schwarz: fully tuned for microwave and mm-wave testing at EuMW 2017
ZTE demonstrates 1 Gbps LTE at IFA 2017 using Rohde & Schwarz test setup
Rohde & Schwarz: vector network analyzer simplifies accurate S-parameter measurements

WSI's OLED Professional innovations create more value for You.

WSI are the PMOLED manufacturer and our factory located in Chun-Nan in Taiwan. Our products are the market leader and pioneer in PMOLED module, including the monochrome, area colors and full color one...


SKIPPER UBT21 - a Bluetooth 4.0 USB serial adapter for industrial and medical use

SKIPPER UBT21 is a Bluetooth 4.0 USB serial adapter for industrial and medical use. It incorporates a Bluetooth Dual-Mode Stack, supports ranges of up to 300 meters and transferrates of 720 kbit/s (ne...


Three of a kind - Versatility based on Low Power ARM Cortex-A15

At this year's Embedded World, MEN has presented three low power, ARM Cortex-A15-based solutions on different form factors: a VMEbus SBC, an industrial box PC and a COM Express Mini module. All so...


Enabling Embedded IoT

Eurotech, a long-time leading provider of embedded systems and a global leader in IoT enablement, showed its new modules and Multi-service IoT Gateways at Embedded World 2017. The newly introduced Eu...


PLS’ UDE and new UAD2next allow more powerful trace analysis of embedded multicore systems

The new Universal Debug Engine 4.8 from PLS Development Tools offers a bunch of new and improved features for trace analysis of embedded multicore systems. With the new access device UAD2next PLS cont...


Disruptive technologies

Rahman Jamal, Global Technology & Marketing Director, National Instruments, talks about disruptive technologies in the consumer world, but also in measurement, automation, and the embedded industr...


AdaCore Announces Availability of QGen Debugger at Embedded World 2017

Jose Ruiz, technical lead at AdaCore for the company's QGen automatic code generator toolset for model-based development, discusses that product and explains what differentiates it from other prod...


SECO IoT roadmap: from the proof of concept to the market

During Embedded World 2017 Gianluca Venere, SECO Director of Global Sales, leads us to discover the company's Industrial IoT roadmap showcased at SECO's main booth, along with the latest UDOO ...


Internet of Chocolate

HCC show off an embedded chocolate vending machine using MQTT to connect to a broker in the cloud. There is an important message behind this cool demo – security and reliability of embedded soft...