Rohde & Schwarz: automotive radar echo generation and radome measurements at EuMW 2017

With the advent of ADAS, vehicles are increasingly being equipped with radar sensors that support drivers in critical situations. To meet the industry’s testing needs, Rohde & Schwarz is developing a range of new radar test solutions. These are being presented to the public for the very first time at EuMW 2017.

Rohde & Schwarz offers visitors a product preview of the new R&S AREG100A automotive radar echo generator for reliable testing of radar sensors in production. The R&S AREG100A supports all automotive radar bands (24 GHz, 76 GHz and 79 GHz). Up to three customer-definable fixed radar distances plus an optional Doppler offset for simulation of radial velocity make it a powerful solution for production testing.

Together with the R&S ATS1000 shielded chamber and the R&S QuickStep test execution software, it ensures fail-safe testing of automotive radar sensors. With this setup, end-of-line testing becomes a standardized, conclusive process to ensure continuous quality control of radar sensors. Thanks to its small footprint and low weight, the R&S AREG100A can be easily integrated into existing test racks for final inspection of the integrated radar sensor at the OEM’s manufacturing sites.

Rohde & Schwarz has developed the R&S QAR specifically to characterize the performance of automotive radar covers such as emblem radomes and car bumpers. The test solution uses an innovative imaging technique that allows very fast measurement of the reflectivity of the DUT. Car manufacturers can now precisely localize and identify any material errors or inhomogeneous material that might impact the sensor’s performance. A complete frequency sweep from 75 GHz to 82 GHz is used to measure material attenuation in the 77 GHz and 79 GHz automotive radar ranges. With both sets of measurements, the R&S QAR offers the comprehensive and detailed analysis required for future radar generations. The R&S QAR is scheduled to be available in the first quarter of 2018.

Rohde & Schwarz will also demonstrate a breakthrough technology in testing and evaluating radar. The new measurement system allows precise angle simulation. This and other features can be seen in a live demonstration.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz: T&M tools to minimize multi-region drive tests for LTE modules
Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices
Rohde & Schwarz: moveable over-the-air test chamber for 5G antennas and transceivers
Rohde & Schwarz: EMC test and measurement solutions at EMV 2018
Rohde & Schwarz: WLAN signaling tester to emulate all IEEE 802.11a/b/g/n/ac standards
Rohde & Schwarz presents deep packet inspection engine at Embedded World
Rohde & Schwarz increases bandwidth of power rail probes to 4 GHz
Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world
Rohde & Schwarz: RTC1000 oscilloscopes offer eight-in-one instrument integration
Rohde & Schwarz: new embedded oscilloscope family with 10-bit vertical resolution
Rohde & Schwarz: vector signal generator achieves up to 1 Mpulse/s
Rohde & Schwarz supports ESA JUICE expedition
Rohde & Schwarz Cybersecurity and Radisys partner on networking and security solution
Rohde & Schwarz delivers 5G NR sub-6 GHz device testing platform
Rohde & Schwarz: quality depends on reliable T&M equipment
Rohde & Schwarz: automotive radar echo generation and radome measurements at EuMW 2017
Rohde & Schwarz: new family of compact, portable test instruments for RF measurement
Rohde & Schwarz: fully tuned for microwave and mm-wave testing at EuMW 2017
ZTE demonstrates 1 Gbps LTE at IFA 2017 using Rohde & Schwarz test setup
Rohde & Schwarz: vector network analyzer simplifies accurate S-parameter measurements

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...


wholesale jerseys