EKF: CompactPCI Serial 7th gen XEON E3 v6 processor CPU card

EKF presents the SC5-FESTIVAL, a rich featured high performance CompactPCI Serial CPU board, equipped with an Intel Xeon E3 mobile workstation processor for demanding applications. For scalability, the SC5-FESTIVAL is also available with a 7th Generation Intel Core processor.

The SC5-FESTIVAL front panel is provided with two each GbE, USB 3.0, and DisplayPort connectors. As an option, two USB 3.1 Type-C front receptacles are available in addition, one including also DP ALT Mode support. Also as an option, up to eight Gigabit Ethernet ports are available via the CompactPCI Serial backplane. The SC5-FESTIVAL is equipped with up to 32GB DDR4 low power RAM with ECC support. Onboard mass-storage is based on M.2 style SSD modules, with the high performance NVMe (PCIe Gen3 x4) interface. In addition, the SC5-FESTIVAL is provided with an on-board SATA hardware RAID controller, for high capacity mass storage solutions across the CompactPCI Serial backplane.

More Information...

Latest News from EKF Elektronik GmbH

EKF: quad M12-X GbE ports for XEON processor CPU cards
EKF: quad port USB 3.0 peripheral slot card for CompactPCI Serial
EKF: peripheral slot card for CompactPCI Serial
EKF: PCI Express non volatile SRAM on a 2280 size M.2 module
EKF: long life, high airflow board mount fan unit
EKF: PICMG CompactPCI Serial peripheral slot board
EKF: interface for industrial with up to four RS-232 ports
EKF: PCIe x8 carrier for XMC-style mezzanine module
EKF: PCIe card fits into CompactPCI Serial systems
EKF: 4HP/3U CompactPCI PlusIO CPU board with Apollo Lake SoC
EKF: quad M.2 PCIe/NVMe SSD carrier board
EKF: full length XMC module carrier PCIe Gen3 x8
EKF: CompactPCI Serial 7th gen XEON E3 v6 processor CPU card
EKF: dual M.2 PCIe/NVMe SSD carrier board
EKF: eight drive SATA SSD plug-in cassette

Arduino CEO Fabio Violante on their migration upwards in engineering

In this video Arduino CEO Fabio Violante talks about their ambitious migration upwards in engineering solutions and products with Alix Paultre in Tegernsee, Germany. Arduino, long known for their deve...


Silicon Lab CEO Tyson Tuttle talks about their wireless IoT portfolio

In this video Silicon Lab's Tyson Tuttle talks to Alix Paultre about their new wireless IoT portfolio. Wireless Xpress provides a configuration-based development environment, with certified Blueto...


Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope

In this video Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope with Alix Paultre at their launch event in Munich. The Infiniium UXR-Series of oscilloscopes has models rangi...


BrainChip explains their new Neuromorphic System-on-Chip

In this video, Bob Beachler of BrainChip talks to Alix Paultre about their latest single-chip neural network technology.  Spiking neural networks (SNNs) are inherently lower power than traditiona...


Vincotech – EMPOWERING YOUR IDEAS

In this video the Vincotech team walks us through the most important topics displayed on their booth at PCIM Europe 2018. It also explains why Vincotech is First in SiC Modules. Being very flexible in...


Microchip talks about their latest secure microcontroller

Microchip's new SAM L10 and SAM L11 families of 32-bit microcontrollers (MCUs) address the growing need for security in Internet of Things (IoT) endpoints by protecting against the increasing the ...


E-Mail Newsletters

nlsc240

Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.


B & S / ECE Magazine

- latest issue is online now -

November 2018

Content Highlights

Cover Story

Internet-connected displays make the industrial IoT more visible

Download now


wholesale jerseys