Portwell: palm-sized PICO-6260 offers low power and fan-less design

Portwell announces the release of the PICO-6260 Pico-ITX embedded system board based on the Intel Atom Celeron processor N3350. The Celeron N3350 integrates the Intel Gen 9 3D graphics engine with up to 12 Execution Units that improves performance and supports 4K Codec Decode & Encode. It also supports one dual-channel 24bit LVDS connection and one HDMI on rear I/O with resolution up to 3840x2160. The 204-pin non-ECC SO-DIMM provides maximum memory, making it capable of supporting up to 8GB of DDR3L. In addition, Portwell’s PICO-6260 features a total of two COM ports, three USB ports (1x USB 3.0 on rear I/O, 2x USB 2.0 on board header) and one gigabit Ethernet.

The PICO-6260 is a palm-sized fan-less Pico-ITX embedded system board built with the Intel Atom processor E3900 series and Intel Celeron processor N3350. Not only does it operate with thermal design power (TDP) from 6 to 12W for fan-less applications, but it also supports an operation temperature range from 0 to 60°C and supports 12V power DC input applications.

The PICO-6260 features one DDR3L 1333/1600/1866 MHz SO-DIMM socket equipped with up to 8GB DDR3L memory. It also integrates Intel graphics supporting DirectX 12, OpenGL 4.2, OpenCL 2.0 plus high-performance, flexible hardware decoding to decode multiple high-resolution 4K videos in parallel. In addition, it supports up to 3840x2160 pixels with HDMI port, and dual-channel LVDS up to 1920x1200 pixels, and is designed with the flexibility for connecting up to three independent display interfaces. One USB 3.0 port ensures fast data transmission with low-power consumption. One 5 Gb/s PCI Express 2.0 lane is used as a full-size mini-PCIe (supporting mSATA) and one M.2 (Key E) socket supporting type 2230 for Wi-Fi / Bluetooth module. Single Intel I210IT Gigabit Ethernet controller provides Gigabit Ethernet LAN access via a RJ45 port.

The PICO-6260 provides great data transferring bandwidth for improving graphics performance. Moreover, the enhancement in flash playback, rich 2D/3D graphics quality, security and power efficiency enables a fascinating visual experience for a variety of applications in, such as retail, networking, Panel PC, and kiosk.

More Information...

Latest News from Portwell

Portwell: compact embedded system ideal for kiosk, digital signage, factory automation
Portwell: palm-sized PICO-6260 offers low power and fan-less design
MEDWEL: embedded fanless system with E3900 processors for medical applications
Portwell: compact fan-less embedded system supports wide industrial temperature range
Portwell: rugged fan-less embedded system with wide voltage of power input
Portwell: COM Express 3.0 type 7 basic module with four 10GbE interfaces
Portwell: COM Express 3.0 module optimized for network appliances
Portwell: heterogeneous architecture platform for software-defined storage applications
Portwell: application focused “RS4U - Ready Solution for You” Box PCs
Portwell: flexible wireless sensor nodes for IoT applications
Portwell releases highly composable IoT gateway
Portwell: COM Express type 6 basic module for medical healthcare and retail systems
Portwell: basic COM Express module for medical healthcare, retail and IoT

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...