Rohde & Schwarz delivers 5G NR sub-6 GHz device testing platform

Rohde & Schwarz is enabling the testing and validation of sub-6 GHz 3GPP 5G new radio (NR) based devices. 3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with a focus on 3.5 GHz. For these sub-6 GHz carrier frequencies, 3GPP currently discusses a maximum bandwidth per component carrier of 100 MHz. Thus, the R&S CMW100 communications manufacturing test set with a measurement bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices. Thanks to its high measurement speed, the R&S CMW100 is an ideal solution for high-volume production environments.

The flexible testing solution is suitable for all types of wireless devices, supporting LTE, WLAN and Bluetooth besides 5G NR sub-6 GHz. This makes the R&S CMW100 a cost-effective solution for mass production of cellular and non-cellular (wireless connectivity) devices calibrated and verified in so-called non-signaling mode (analyzer/generator). Manufacturers of handsets and devices profit from a variety of measurement functionalities with a single investment in equipment, training and adaptation costs.

The latest 160 MHz version of R&S CMW100 is available now from Rohde & Schwarz. Dedicated vector signal analysis and generator software options supporting 5G NR sub-6 GHz will be available in 2018.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz: FPC entry-level spectrum analyzer combines three key RF test instruments
Rohde & Schwarz to present signaling test solution for Bluetooth LE
Rohde & Schwarz: signal generation and analysis solution for 5G New Radio at MWC 2018
Rohde & Schwarz presents test solution for 3GPP release 14 location services for NB-IoT
Rohde & Schwarz: T&M tools to minimize multi-region drive tests for LTE modules
Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices
Rohde & Schwarz: moveable over-the-air test chamber for 5G antennas and transceivers
Rohde & Schwarz: EMC test and measurement solutions at EMV 2018
Rohde & Schwarz: WLAN signaling tester to emulate all IEEE 802.11a/b/g/n/ac standards
Rohde & Schwarz presents deep packet inspection engine at Embedded World
Rohde & Schwarz increases bandwidth of power rail probes to 4 GHz
Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world
Rohde & Schwarz: RTC1000 oscilloscopes offer eight-in-one instrument integration
Rohde & Schwarz: new embedded oscilloscope family with 10-bit vertical resolution
Rohde & Schwarz: vector signal generator achieves up to 1 Mpulse/s
Rohde & Schwarz supports ESA JUICE expedition
Rohde & Schwarz Cybersecurity and Radisys partner on networking and security solution
Rohde & Schwarz delivers 5G NR sub-6 GHz device testing platform
Rohde & Schwarz: quality depends on reliable T&M equipment
Rohde & Schwarz: automotive radar echo generation and radome measurements at EuMW 2017

Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


Ted Marena of Microsemi talks about their scope-free on-chip debug tools

In this video Ted Marena of Microsemi talks about their scope-free on-chip debug tools with Alix Paultre at Embedded World 2018. SmartDebug tool works with the Microsemi FPGA array and SERDES without ...


Infineon demonstrates their iMotion motor control solution at Embedded World

In this video Infineon explains their latest  IMC100 series iMOTION motor control IC at Embedded World 2018 in Nuremberg. The device provides a ready-to-use solution for high-efficiency variable-...


Samsung goes over their new ARTIK IoT development system

In this video James Stansberry of Samsung talks to Alix Paultre about their ARTIK IoT development system at Embedded World in Nuremberg. The family of system-on-modules provide a complete, production-...


Cypress explains their latest low-power 32-bit Arm Cortex-M4 PSoC 6

In this video Allen Hawes of Cypress Semiconductor talks to Alix Paultre about their latest low-power 32-bit Arm Cortex-M4 PSoC 6, designed to provide a secure high-performance MCU for next-generation...


wholesale jerseys