Portwell: compact embedded system ideal for kiosk, digital signage, factory automation

Portwell releases the WEBS-7000, a palm-sized fan-less embedded system featuring the latest 14nm Intel Pentium and Intel Celeron processors. The WEBS-7000 is equipped with the Portwell PICO-6260, a PICO-ITX form factor embedded board based on the Intel Celeron processor N3350, which integrates the Intel Gen9 3D graphics engine with up to 12 execution units that improves performance and supports faster 4K encode and decode operations. The compact WEBS-7000 embedded system also features DDR3L SO-DIMM up to 8GB supporting 1866/1600 MT/s; single Gigabit LAN via Intel Ethernet Controller I210IT; one USB 3.0 port; one HDMI on rear I/O with resolution up to 4096 x 2160; and multiple storages with mSATA or SATA DOM by project.

The simple and exquisite design of WEBS-7000 embedded system with wall mounting as well as panel/ VESA mounting enables flexible installation and easy system maintenance. By taking advantage of the low 6W thermal design power of the Intel Celeron processor N3350, the fan-less WEBS-7000 can support operating temperatures from 0 to 45°C while ensuring silent operation, reliability and low maintenance rate and costs at the same time. Moreover, the enhancement in flash playback, rich 2D/3D graphics quality, security and power efficiency enables a fascinating visual experience for a variety of applications in retail, networking, digital signage, and kiosk.

More Information...

Latest News from Portwell

Portwell: 4x4-inch Mini PC board for digital signage, automation and medical
Portwell: compact embedded system ideal for kiosk, digital signage, factory automation
Portwell: palm-sized PICO-6260 offers low power and fan-less design
MEDWEL: embedded fanless system with E3900 processors for medical applications
Portwell: compact fan-less embedded system supports wide industrial temperature range
Portwell: rugged fan-less embedded system with wide voltage of power input
Portwell: COM Express 3.0 type 7 basic module with four 10GbE interfaces
Portwell: COM Express 3.0 module optimized for network appliances
Portwell: heterogeneous architecture platform for software-defined storage applications
Portwell: application focused “RS4U - Ready Solution for You” Box PCs
Portwell: flexible wireless sensor nodes for IoT applications
Portwell releases highly composable IoT gateway
Portwell: COM Express type 6 basic module for medical healthcare and retail systems
Portwell: basic COM Express module for medical healthcare, retail and IoT

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...


wholesale jerseys