Mouser: RSL10 SoC, ideal for IoT and connected health wearables

Mouser Electronics is now stocking the RSL10 multi-protocol system-on-chip from ON Semiconductor. Offering ultra-low-power wireless connectivity for a broad range of applications, the versatile Bluetooth 5-certified SoC supports Bluetooth low energy technology as well as 2.4 GHz proprietary or custom protocol stacks. The ON Semiconductor RSL10 SoC, available from Mouser Electronics, features a 48 MHz Arm Cortex-M3 processor bolstered by a 32-bit dual-Harvard DSP core that supports the audio codecs necessary for wireless audio communication. Including both flash and RAM, the device’s diverse memory architecture enables storage of the Bluetooth stack, as well as other applications.

The highly integrated RSL10 SoC includes a DMA controller, oscillators, and ultra-efficient power management units. The SoC is designed for use in applications with 1.2V and 1.5V batteries and supports a supply voltage range of 1.1 to 3.6 V without the need for an external DC/DC converter.  The SoC is supported by the RSL10 Evaluation Board, which provides access to all input and output connections through standard 0.1-inch headers. Additionally, the evaluation board offers an onboard communication interface circuit and a J-Link solution to enable users to debug the board through a USB/PC connection.

ON Semiconductor’s RSL10 SoC is designed to bring ultra-low-power connectivity to Internet of Things devices and high-performance wearables. The SoC supports a wide range of medical applications including fitness trackers, hearing aids, heart rate monitors, glucose monitors and pulse oximeters.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys