Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world

Rohde & Schwarz will be presenting its T&M instruments with the tagline "Oscilloscope innovation. Measurement confidence". Three new oscilloscope series R&S RTC1000, R&S RTM3000 and R&S RTA4000 will be on show to the general public at embedded world 2018. These oscilloscopes are equipped with cutting-edge technology, a smartphone-like touchscreen and far more features than conventional instruments in their class. Together with the R&S RTB2000 oscilloscopes introduced in 2017, the T&M expert now offers market-leading 1000, 2000, 3000 and 4000 class instruments.

The R&S RTM3000 oscilloscopes are designed for DC power and voltage measurements like ripple and noise measurements Especially for the increasingly stricter tolerance limits are oscilloscopes with a 10-bit vertical resolution and a vertical range up to 500µV/div with full bandwidth a perfect solution. In addition, the 80 Msample memory depth allows measurements over long time periods with high sampling rates.

The R&S RTA4000 oscilloscopes have an even larger memory of 100 Msample per channel, making them ideal for analyzing serial protocols and power-on/off sequences. They offer a 1 Gsample segmented acquisition memory and have a 10-bit resolution to clearly display fine details.

The cost-effective R&S RTC1000 is extremely compact and can be upgraded with numerous additional functions: eight-channel logic analyzer, four-channel pattern generator, digital voltmeter, component tester, spectrum analyzer, counter, and protocol analyzer for I2C, SPI, UART/RS-232, CAN and LIN. Users can expand the bandwidth from 50 MHz to a maximum of 300 MHz via software license – something no other device in this price class offers.

In addition to its oscilloscopes, Rohde & Schwarz will be demonstrating new probes to meet current challenges in the field of power measurement. A new 1:1 power rail probe with 4 GHz measurement bandwidth detects even the smallest coupled RF signals in sensitive embedded components used for mobile and IoT applications. For this highly sensitive, very low-noise probe, a 6 GHz model of the extremely powerful Windows-based R&S RTO2000 series of lab oscilloscopes is recommended. Other probes on display include a probe for measuring battery life as well as new probes for power electronics measurements up to 6000 V that offer a measurement bandwidth of up to 200 MHz, a particularly high common mode rejection ratio and for this type of probes- the best DC measurement accuracy of 0.5 percent.

The R&S Scope Rider is perfect for power electronics measurements in the field. Since the fully insulated handheld oscilloscope meets measurement category CAT IV requirements, it can be used to perform measurements up to 600 V at the source of low voltage installations. Various functions can be added, such as a harmonic analyzer for power supply quality. The R&S Scope Rider features a CAN/LIN trigger and decode option for users in the automotive industry.

Components in large-scale integrated designs are often sensitive to RF disturbance signals from neighboring components. EMC measurements are therefore imperative during development. Rohde & Schwarz presents a pre-compliance test setup for developers who only sporadically measure EMC to test their designs. The solution is based on the economical R&S FPC1000 spectrum analyzer and the very user-friendly R&S ELEKTRA EMC measurement software.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz and Spirent announce collaboration for TC8 Automotive Ethernet testing
Rohde & Schwarz: Scope Rider provides assistance in development of electric superbike
Rohde & Schwarz: conformance test coverage for certification of eMTC and NB-IoT devices
Rohde & Schwarz: new signal generators set standards in the class up to 6 GHz
Rohde & Schwarz: RTP family combines innovative signal integrity with high acquisition rate
Rohde & Schwarz presents innovative test and measurement equipment
Rohde & Schwarz: FPC entry-level spectrum analyzer combines three key RF test instruments
Rohde & Schwarz to present signaling test solution for Bluetooth LE
Rohde & Schwarz: signal generation and analysis solution for 5G New Radio at MWC 2018
Rohde & Schwarz presents test solution for 3GPP release 14 location services for NB-IoT
Rohde & Schwarz: T&M tools to minimize multi-region drive tests for LTE modules
Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices
Rohde & Schwarz: moveable over-the-air test chamber for 5G antennas and transceivers
Rohde & Schwarz: EMC test and measurement solutions at EMV 2018
Rohde & Schwarz: WLAN signaling tester to emulate all IEEE 802.11a/b/g/n/ac standards
Rohde & Schwarz presents deep packet inspection engine at Embedded World
Rohde & Schwarz increases bandwidth of power rail probes to 4 GHz
Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world
Rohde & Schwarz: RTC1000 oscilloscopes offer eight-in-one instrument integration
Rohde & Schwarz: new embedded oscilloscope family with 10-bit vertical resolution

Arduino CEO Fabio Violante on their migration upwards in engineering

In this video Arduino CEO Fabio Violante talks about their ambitious migration upwards in engineering solutions and products with Alix Paultre in Tegernsee, Germany. Arduino, long known for their deve...


Silicon Lab CEO Tyson Tuttle talks about their wireless IoT portfolio

In this video Silicon Lab's Tyson Tuttle talks to Alix Paultre about their new wireless IoT portfolio. Wireless Xpress provides a configuration-based development environment, with certified Blueto...


Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope

In this video Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope with Alix Paultre at their launch event in Munich. The Infiniium UXR-Series of oscilloscopes has models rangi...


BrainChip explains their new Neuromorphic System-on-Chip

In this video, Bob Beachler of BrainChip talks to Alix Paultre about their latest single-chip neural network technology.  Spiking neural networks (SNNs) are inherently lower power than traditiona...


Vincotech – EMPOWERING YOUR IDEAS

In this video the Vincotech team walks us through the most important topics displayed on their booth at PCIM Europe 2018. It also explains why Vincotech is First in SiC Modules. Being very flexible in...


Microchip talks about their latest secure microcontroller

Microchip's new SAM L10 and SAM L11 families of 32-bit microcontrollers (MCUs) address the growing need for security in Internet of Things (IoT) endpoints by protecting against the increasing the ...


E-Mail Newsletters

nlsc240

Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.


B & S / ECE Magazine

- latest issue is online now -

October 2018

Content Highlights

Cover Story

Slimming program for medical operating devices

Download now


wholesale jerseys