Rohde & Schwarz: EMC test and measurement solutions at EMV 2018

Rohde & Schwarz will demonstrate its comprehensive range of EMC test and measurement solutions – from single devices to customer-specific, turnkey systems. The EMC expert will also present customized measurement software for precompliance and certification measurements as well as accessories such as broadband amplifiers, RF switching units and measurement antennas.

For the new radio equipment directive (RED), the now mandatory certification guideline for radio equipment in Europe, the R&S TS8997 test system offers certification testing in line with ETSI EN 301 893 and EN 300 328 for wireless devices in the 2.4 GHz and 5 GHz band as well as testing in line with FCC §15.247 and §15.407, including DFS tests. The R&S TS8997 test system supports DUTs with 8x8 MIMO. It meets or even succeeds the demanding measurement requirements of these test standards. Other test solutions on display include solutions for broadcast receivers in line with RED, for digital TV broadcast receivers in line with ETSI EN 303 340, for radio receivers in line with ETSI EN 303 345 and for indoor satellite broadcast receivers in line with ETSI EN 303 372-2.

Thanks to their high measurement speed and comprehensive diagnostic tools, the R&S ESR and R&S ESW EMC test receivers are ideal for EMC certification in line with CISPR, EN, FCC and MIL as well as for automotive applications. External mixers were added to extend the frequency range of the R&S ESW for measurements in line with FCC and ETSI. The receiver now measures, for example, the harmonics of transmission equipment up to a receive frequency of 500 GHz.

For developers who want to check EMC performance during development, Rohde & Schwarz has introduced the clear and easy-to-use R&S ELEKTRA test software. R&S ELEKTRA replaces the proven R&S ES-SCAN software and supports all of the company's current EMC test receivers and spectrum analyzers. Rohde & Schwarz will also present an attractive solution for EMC debugging during development: the entry-level R&S FPC1000 spectrum analyzer, the R&S HM6050-2 line impedance stabilization network and the R&S HZ-17 near-field probe set together with R&S ELEKTRA.

Different test scenarios are often required to validate a design or product. The broadband amplifiers in the new R&S BBA130 family from Rohde & Schwarz offer a one-box solution.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz and Spirent announce collaboration for TC8 Automotive Ethernet testing
Rohde & Schwarz: Scope Rider provides assistance in development of electric superbike
Rohde & Schwarz: conformance test coverage for certification of eMTC and NB-IoT devices
Rohde & Schwarz: new signal generators set standards in the class up to 6 GHz
Rohde & Schwarz: RTP family combines innovative signal integrity with high acquisition rate
Rohde & Schwarz presents innovative test and measurement equipment
Rohde & Schwarz: FPC entry-level spectrum analyzer combines three key RF test instruments
Rohde & Schwarz to present signaling test solution for Bluetooth LE
Rohde & Schwarz: signal generation and analysis solution for 5G New Radio at MWC 2018
Rohde & Schwarz presents test solution for 3GPP release 14 location services for NB-IoT
Rohde & Schwarz: T&M tools to minimize multi-region drive tests for LTE modules
Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices
Rohde & Schwarz: moveable over-the-air test chamber for 5G antennas and transceivers
Rohde & Schwarz: EMC test and measurement solutions at EMV 2018
Rohde & Schwarz: WLAN signaling tester to emulate all IEEE 802.11a/b/g/n/ac standards
Rohde & Schwarz presents deep packet inspection engine at Embedded World
Rohde & Schwarz increases bandwidth of power rail probes to 4 GHz
Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world
Rohde & Schwarz: RTC1000 oscilloscopes offer eight-in-one instrument integration
Rohde & Schwarz: new embedded oscilloscope family with 10-bit vertical resolution

Arduino CEO Fabio Violante on their migration upwards in engineering

In this video Arduino CEO Fabio Violante talks about their ambitious migration upwards in engineering solutions and products with Alix Paultre in Tegernsee, Germany. Arduino, long known for their deve...


Silicon Lab CEO Tyson Tuttle talks about their wireless IoT portfolio

In this video Silicon Lab's Tyson Tuttle talks to Alix Paultre about their new wireless IoT portfolio. Wireless Xpress provides a configuration-based development environment, with certified Blueto...


Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope

In this video Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope with Alix Paultre at their launch event in Munich. The Infiniium UXR-Series of oscilloscopes has models rangi...


BrainChip explains their new Neuromorphic System-on-Chip

In this video, Bob Beachler of BrainChip talks to Alix Paultre about their latest single-chip neural network technology.  Spiking neural networks (SNNs) are inherently lower power than traditiona...


Vincotech – EMPOWERING YOUR IDEAS

In this video the Vincotech team walks us through the most important topics displayed on their booth at PCIM Europe 2018. It also explains why Vincotech is First in SiC Modules. Being very flexible in...


Microchip talks about their latest secure microcontroller

Microchip's new SAM L10 and SAM L11 families of 32-bit microcontrollers (MCUs) address the growing need for security in Internet of Things (IoT) endpoints by protecting against the increasing the ...


E-Mail Newsletters

nlsc240

Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.


B & S / ECE Magazine

- latest issue is online now -

October 2018

Content Highlights

Cover Story

Slimming program for medical operating devices

Download now


wholesale jerseys