Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices

Rohde & Schwarz announced the availability of test solutions for the Broadcom Max Wi-Fi chipset portfolio, the industry’s first complete ecosystem of 802.11ax Wi-Fi devices. In collaboration with Broadcom Limited, Rohde & Schwarz has successfully verified its R&S CMW test platform for the IEEE 802.11ax ecosystem, enabling wireless OEMs and ODMs to use Broadcom Max Wi-Fi chipsets for R&D, quality control, and production prototyping.

Next generation Wi-Fi, based on the IEEE 802.11ax standard, offers speed, capacity, coverage and battery-life improvements in congested environments. It uses technologies such as uplink/downlink orthogonal frequency division multiplexing access (UL/DL OFDMA), multi-user multiple input multiple output (MU-MIMO) and target wake time. These technologies pose challenges for test and measurement equipment. The T&M instruments from Rohde & Schwarz have been qualified for characterizing Broadcom Max Wi-Fi chipsets, both at the RF level for tests such as error vector magnitude, timing measurements and spectrum emission compliance, and at the protocol level for testing features such as multi-user scheduling, application services and network management. Through the Broadcom manufacturing test license program, Rohde & Schwarz is able to develop software for Broadcom Max Wi-Fi chipsets and provide full 802.11ax test solutions to OEMs and ODMs.

The R&S FSW signal and spectrum analyzer and R&S SMW200A vector signal generator allow EVM tests well below –50 dB, providing the industry’s best performance for R&D testing. The R&S CMW270 wireless connectivity tester is another instrument licensed for Max Wi-Fi testing based on its real WLAN network emulation for IEEE 802.11a/b/g/n/ac/ax. The tester can verify and debug devices from the physical to the application layer within the OSI model.

In addition, the R&S CMW100 communications manufacturing test set is recognized by Broadcom as the market-leading production tester. It provides multi-standard and multi-DUT capabilities for production environments, including test coverage, speed, efficiency and yield.

At this year’s Mobile World Congress, Rohde & Schwarz will showcase a production-ready solution featuring the R&S CMW100 and the Broadcom Max Wi-Fi device.

More Information...

Latest News from Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz and Spirent announce collaboration for TC8 Automotive Ethernet testing
Rohde & Schwarz: Scope Rider provides assistance in development of electric superbike
Rohde & Schwarz: conformance test coverage for certification of eMTC and NB-IoT devices
Rohde & Schwarz: new signal generators set standards in the class up to 6 GHz
Rohde & Schwarz: RTP family combines innovative signal integrity with high acquisition rate
Rohde & Schwarz presents innovative test and measurement equipment
Rohde & Schwarz: FPC entry-level spectrum analyzer combines three key RF test instruments
Rohde & Schwarz to present signaling test solution for Bluetooth LE
Rohde & Schwarz: signal generation and analysis solution for 5G New Radio at MWC 2018
Rohde & Schwarz presents test solution for 3GPP release 14 location services for NB-IoT
Rohde & Schwarz: T&M tools to minimize multi-region drive tests for LTE modules
Rohde & Schwarz: test solutions for Broadcom 802.11ax Wi-Fi devices
Rohde & Schwarz: moveable over-the-air test chamber for 5G antennas and transceivers
Rohde & Schwarz: EMC test and measurement solutions at EMV 2018
Rohde & Schwarz: WLAN signaling tester to emulate all IEEE 802.11a/b/g/n/ac standards
Rohde & Schwarz presents deep packet inspection engine at Embedded World
Rohde & Schwarz increases bandwidth of power rail probes to 4 GHz
Rohde & Schwarz: innovative T&M equipment for next generation designs at embedded world
Rohde & Schwarz: RTC1000 oscilloscopes offer eight-in-one instrument integration
Rohde & Schwarz: new embedded oscilloscope family with 10-bit vertical resolution

Arduino CEO Fabio Violante on their migration upwards in engineering

In this video Arduino CEO Fabio Violante talks about their ambitious migration upwards in engineering solutions and products with Alix Paultre in Tegernsee, Germany. Arduino, long known for their deve...


Silicon Lab CEO Tyson Tuttle talks about their wireless IoT portfolio

In this video Silicon Lab's Tyson Tuttle talks to Alix Paultre about their new wireless IoT portfolio. Wireless Xpress provides a configuration-based development environment, with certified Blueto...


Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope

In this video Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope with Alix Paultre at their launch event in Munich. The Infiniium UXR-Series of oscilloscopes has models rangi...


BrainChip explains their new Neuromorphic System-on-Chip

In this video, Bob Beachler of BrainChip talks to Alix Paultre about their latest single-chip neural network technology.  Spiking neural networks (SNNs) are inherently lower power than traditiona...


Vincotech – EMPOWERING YOUR IDEAS

In this video the Vincotech team walks us through the most important topics displayed on their booth at PCIM Europe 2018. It also explains why Vincotech is First in SiC Modules. Being very flexible in...


Microchip talks about their latest secure microcontroller

Microchip's new SAM L10 and SAM L11 families of 32-bit microcontrollers (MCUs) address the growing need for security in Internet of Things (IoT) endpoints by protecting against the increasing the ...


E-Mail Newsletters

nlsc240

Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.


B & S / ECE Magazine

- latest issue is online now -

October 2018

Content Highlights

Cover Story

Slimming program for medical operating devices

Download now


wholesale jerseys