Arrow: ARIS-EDGE-S3 kit simplifies development of battery-powered applications

Arrow Electronics has extended its convenient and flexible ARIS (Arrow Renesas IoT Synergy) platform for developing IoT devices by introducing the ARIS-EDGE-S3, which packs extra compute performance and the opportunity to add a compact user interface for richer interactions.

Teaming the latest Arm Cortex-M4-based 48MHz Renesas Synergy S3A3 Group of microcontrollers with rich context sensing and the multi-protocol wireless subsystem proven in other ARIS-EDGE boards, the new ARIS-EDGE-S3 lets developers add extra sophistication to connected objects. They can also connect a small-form-factor TFT-display, and take advantage of tools and software to create a graphical user interface for an extra level of user interactivity.

The on-board sensors include the Bosch Sensortec BNO055 9-degrees-of-freedom application specific sensor node absolute orientation sensor, which contains a MEMS accelerometer and gyroscope, a geo-magnetic sensor, and a 32-bit microcontroller running Bosch Sensortec BSX3.0 FusionLib software. This sensor is widely used in robotics, augmented and virtual reality, drones, gaming, and other industrial applications. Also on-board, the BME280 environmental sensor from Bosch Sensortec combines temperature, humidity and pressure sensing., while Aa separate MEMS microphone and an ambient light sensor further extend contextual awareness.

The radio module comes with built-in Bluetooth Low Energy (BLE 4.1/4.2), Thread, and ZigBee stacks, giving easy access to the most popular connectivity standards for use cases such as home automation, smart meters, smart lighting, wearable electronics, medical monitors, industrial sensing, and others.

Arrow’s ARIS-EDGE concept, updated and upgraded with this latest and most powerful of the Edge boards, connects developers with the Renesas Synergy platform giving access to an optimized operating system, qualified stacks, consistent software libraries, and APIs that streamline IoT-device development and lower total cost of ownership.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys