Apacer upgrades to new-generation DDR4-2666 memory modules

The rapid confluence of artificial intelligence (AI) and the Internet of Things (IoT) have not only fueled an increasing demand for various smart application and smart devices and servers, but also increased performance demand in computing power and transfer speed. In response to the successive upgrade in Intel’s and AMD’s servers, desktop processors, and mobile processors platforms, as well as the increased support of adaptation of the DDR4-2666 specification, Apacer has outpaced its competitors in the mass production of DDR4-2666 memory modules for server and industry applications. Apacer’s DDR4-2666 memory is compatible with the latest Intel Purley and AMD EPYC processor platforms, fully highlighting the company’s ambition to the top supplier for the long-awaited overhaul in the global server market and officially propelling industrial memory into the high-performance, high-bandwidth realm of DDR4-2666.

Apacer anticipates fully demonstrating the high-performance, high-speed, and high-stability features of its products, thereby satisfying customer requirements. DRAMeXchange, a division of TrendForce, predicts that the global shipping volume of servers could reach 5.53% in 2018 amidst industrial transformation and the rising popularity of smart applications, which would drive growth in server memory of up to 28.6%. That growth would top all memory products. The strong demand for server memory is not only fueled by the server demands of data centers but also associated with the upgrade of Intel and AMD server platforms. Apacer’s comprehensive upgrade of server and industrial memory modules to the DDR4-2666 specification not only caters to the next generation of server platforms, specifically, Intel Purley and AMD EYPC, but also increases transfer rates to 2666 M/s, which is 11% higher than the previous-generation DDR4-2400 specification. The new-generation memory modules outperform the older generation in speed, efficiency, and power conservation.

Apacer’s modules are compatible with a variety of products and meet JEDEC memory specifications. They support UDIMM, SODIMM, RDIMM, LRDIMM, ECC UDIMM, and ECC SODIMM specifications and range from 2 GB to 64 GB capacity choices. These products are targeted to satisfy the replacement demands of servers, industrial computers, and smart devices. By taking advantage of its dominance in vertical application markets, such as IoT, healthcare, transportation, national defense, and gaming, and drawing on its superior customization capabilities and immense industrial experiences, Apacer aims to preemptively gain a leading position in this wave of smart innovative development and be fully prepared for era of DDR4-2666.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys