Teledyne LeCroy: WaveSurfer 3000z oscilloscopes with bandwidths from 100 MHz to 1 GHz

Teledyne LeCroy announced the WaveSurfer 3000z oscilloscopes, which expand the existing WaveSurfer 3000 bandwidth range above and below that of earlier models, while also bolstering functionality for power-electronics testing. In addition, the new models provide more processing power and memory. All WaveSurfer 3000z oscilloscopes feature a large 10.1” capacitive touch screen, a vast set of debug and analysis tools, multi-instrument capabilities, feature/option upgrades, and support for a wider probe range. The WaveSurfer 3000z comes in five models with bandwidths from 100 MHz to 1 GHz and sample rates up to 4 GS/s.

The WaveSurfer 3000z adds a 100-MHz version that brings the powerful features of the WaveSurfer 3000 to an entry-level price, and a highly affordable, yet equally feature-loaded 1-GHz model. The 100-MHz version addresses the requirements of general-purpose debugging and validation tasks, while the 1-GHz model serves users looking for the bandwidth to tackle sophisticated applications such as high-speed serial communications test and RF signal analysis.

The WaveSurfer 3000z combines an entirely new CPU engine, an improved internal-communications bus, and up to 20 Mpoints of acquisition memory, twice that of the WaveSurfer 3000, to facilitate rapid and responsive oscilloscope operation. Meanwhile, the 10.1” capacitive touch screen combines with Teledyne LeCroy’s MAUI user interface to give users a better look at waveforms and deeper insight into signal abnormalities. Now available for the WaveSurfer 3000z, the Power Analysis software package performs detailed analysis of line power, control loops, and system/device power performance. The WaveSurfer 3000z’s fast display update rate of 130,000 waveforms/s makes it easy to identify anomalies during power analysis.

To augment the Power Analysis software package, the WaveSurfer 3000z offers an advanced active-probe interface that supports Teledyne LeCroy’s power-focused HVFO103 high-voltage, fiber optically-isolated probe, RP4030 power-rail probe, CP03xA current probe, and HVD3000/3000A high-voltage differential probes.

Together, the Power Analysis software, specialized probes, and the balance of Teledyne LeCroy’s large selection of probes give the WaveSurfer 3000z all of the required resources for debugging and validation of power electronics and power-conversion circuits.

With analysis features such as History mode for waveform playback, extensive triggering capabilities, and WaveScan advanced search and find, the WaveSurfer 3000z delivers fast and thorough detection and isolation of signal anomalies. It also packs a deep measure and math toolset of 20 math functions for quick waveform insight and 24 automated parameter measurements. A dedicated grid eases viewing of math traces, while statistics, histicons, and trends extract revealing details from parameter measurements. The LabNotebook feature saves and/or restores oscilloscope setups and waveforms with the touch of a single button, and provides a handy tool for annotation and documentation of your work sessions.

 

Adding to the comprehensive toolset inherited from earlier models, the WaveSurfer 3000z includes LXI-based web browsing to facilitate remote configuration and operation. In the event of AC-line disconnection, a new “power on AC line” feature restores power by simply reattaching the cord. The already broad palette of optional serial trigger/decode packages now adds an Audiobus trigger/decode package, which performs analysis and debug of the digital audio-bus standard in its I2S, LJ, RJ, and TDM variants.

Not only is the WaveSurfer 3000z an extremely capable oscilloscope, but it also can serve as a 5-in-1 instrument. The function-generator option offers a standard collection of waveforms at up to 25 MHz, while the logic-analyzer option provides 16 digital channels for mixed-signal capabilities. A digital-voltmeter option performs 4-digit voltage measurements and 5-digit frequency counting on any channel, and the protocol-analyzer option with serial trigger/decode features intuitive, color-coded waveform overlays and interactive data tables.


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


Ted Marena of Microsemi talks about their scope-free on-chip debug tools

In this video Ted Marena of Microsemi talks about their scope-free on-chip debug tools with Alix Paultre at Embedded World 2018. SmartDebug tool works with the Microsemi FPGA array and SERDES without ...


Infineon demonstrates their iMotion motor control solution at Embedded World

In this video Infineon explains their latest  IMC100 series iMOTION motor control IC at Embedded World 2018 in Nuremberg. The device provides a ready-to-use solution for high-efficiency variable-...


Samsung goes over their new ARTIK IoT development system

In this video James Stansberry of Samsung talks to Alix Paultre about their ARTIK IoT development system at Embedded World in Nuremberg. The family of system-on-modules provide a complete, production-...


Cypress explains their latest low-power 32-bit Arm Cortex-M4 PSoC 6

In this video Allen Hawes of Cypress Semiconductor talks to Alix Paultre about their latest low-power 32-bit Arm Cortex-M4 PSoC 6, designed to provide a secure high-performance MCU for next-generation...


wholesale jerseys