F&S: COM for battery-powered applications with numerous interfaces

F&S Elektronik Systeme introduces a new Computer on Module as part of the efus product family. Efus A53LS is based on a 64 Bit NXP processor, the QorIQ LS1012A Layerscape, with ARM Cortex-A53 core and 800 MHz clock frequency. The CPU is optimized for battery-backed or USB-powered, space-constrained networking and IoT applications. Other highlights are high performance, fast interfaces and low power loss of only one Watt (typ.). The LS1012A incorporates the same Trust Architecture and software compatibility of higher-tier QorIQ LS family devices, enabling scalable, secure applications that leverage a common 64-bit software platform. Efus A53LS is equipped with up to 512MB DDR3L RAM and 64MB QSPI NOR Flash. It comes with interfaces like 2x 10/100/1000Mb Ethernet, WLAN IEEE802.11b/g/n, BT 2.1 + EDR, 4.0/4.1, UART, 2x I2C, SPI, USB 3.0 OTG, CAN, SDIO for μSD Slot, SATA and PCIe. F&S Elektronik Systeme’s customized Linux Yocto supports all available interfaces of efus A53LS, enabling an easy software development without the need of having in-depth hardware knowledge. efus A53LS will stay available until minimum 2031 (Commitment to Longevity by NXP).

The efus form factor has become very successful on the market, due to its frequently demanded characteristics: It has a size of 47x 62mm only and a 230 pin plug connector (MXM2), as well as the possibility to realize a design with a four-layer base board only. Other efus modules are available with NXP i.MX 6ULL, i.MX 6SoloX and i.MX 6Solo/ Dual/ Quad, modules with i.MX 8 are planned for 2018.

F&S Elektronik Systeme supports its customers with the F&S project guarantee: we are at your side from the project start until the successful completion of the project. Starterkit, workshop, documents for hardware and software development and free support by our experienced engineers complete the comprehensive F&S support.


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....


Infineon explains their latest wireless charging solution at Embedded World

In this video Infineon goes over their latest wireless charging solutions at the Embedded World show in Nuremberg, Germany. The spokesperson explains the difference between their Qi-compatible solutio...


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


wholesale jerseys