Particle: production-ready LTE cellular solution for future proofing IoT

Particle announced the release of its LTE-enabled, cellular E Series IoT module. This all-in-one cellular solution is the first commercially available LTE hardware module for IoT product creators to future proof their devices along retiring 2G and 3G networks. Particle’s LTE module includes built-in cloud and SIM support, and is certified for the newly available LTE networks designed just for IoT.

Long Term Evolution (LTE) CAT M1 network technologies are optimized for Internet of Things applications for a number of reasons. LTE hardware is less costly, offers longer battery life, and improved connectivity range. These features make novel IoT applications – such as distributed sensor networks for agriculture or hard-to-reach industrial monitoring environments – possible, whereas they were not economically feasible in the past. These features, combined with LTE’s superior coverage, will facilitate the next wave of successfully deployed IoT products. Additionally, as US carriers move to eliminate 2G networks and end new 2G/3G device certifications, Particle’s LTE E Series provides a much needed transition path for IoT product creators while avoiding costly disruptions.

The LTE modules are part of Particle’s existing E Series suite — an enterprise-level collection of cellular IoT solutions (including 2G, 3G, and now LTE models) — that come bundled with the Particle Device Cloud, Device OS, and Particle’s extensive collection of developer tools. Particle’s pre-integrated cellular solution provides a faster, far less complicated path to market by taking care of the vast majority of the challenges that plague commercial IoT development — not least of which includes the extensive, time-consuming, and costly certifications required of connected devices (e.g. FCC; PTCRB; and Carrier-Specific).

The LTE lineup includes two LTE CAT-M1 models (LTE B13 and LTE B2/4/5/12) and is fully certified, low profile, surface mountable for industrial environments, and powered by Qualcomm’s MDM9206 IoT Modem and u-blox’s SARA-R410-02B module.


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....


Infineon explains their latest wireless charging solution at Embedded World

In this video Infineon goes over their latest wireless charging solutions at the Embedded World show in Nuremberg, Germany. The spokesperson explains the difference between their Qi-compatible solutio...


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


wholesale jerseys