Mouser: MAX32652 ultra-low-power MCU enables extra battery life, scalable memory

Mouser Electronics is now stocking the MAX32652 ultra-low-power microcontroller from Maxim Integrated. Offering designers the low-power consumption of an embedded microcontroller with the capabilities of a higher-powered applications processor, the MAX32652 is the latest offering from Maxim's family of DARWIN Generation UP microcontrollers, which combine wearable-grade power technology with large embedded memories and advanced embedded security.

The Maxim MAX32652 microcontroller, available from Mouser Electronics, is based on an Arm Cortex-M4 core with a floating point unit and supports a future-proof memory architecture that enables designers to grow the capabilities of their Internet of Things device applications. The memory-scalable device integrates 3 MBytes of flash, 1 MByte of SRAM, and a clock running up to 120 MHz. Low-power SRAM retention modes help extend battery life, and the low-power active mode features advanced power management capabilities. Additional memory expansion is available through external memory using the device’s 120 MBytes-per-second HyperBus/XcellaBus DDR interface.

The MAX32652 microcontroller provides a range of high-speed peripherals, including high-speed USB 2.0, an SD card controller, and a TFT display. Additional serial interfaces include dedicated FIFOs that enable communication to external sensors, a four-input, 10-bit ADC that monitors system power, and an I2S port that supports bi-directional audio streaming. The device also leverages Maxim's best-in-class security toolbox to help create secure sensors for IoT applications.

The Maxim MAX32652 microcontroller is ideal for applications such as fitness monitors, wearable medical patches, portable medical devices, industrial sensors, and other battery-powered IoT devices. The microcontroller is supported by the MAX32650 Evaluation Kit, also available to order from Mouser. The MAX32650 kit contains a MAX32650 microcontroller with a pre-programmed demo, JTAG debugger with ribbon cable, and two USB cables.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys