TRINAMIC: smart stepper motor drivers enable rapid application development

TRINAMIC Motion Control announce the extension of the successful motor mountable modules by the TMCM-1240. The module incorporates Trinamic´s latest stepper motor drive technologies including the popular silent control mode StealthChop in its second generation and the sensorless load-dependent current scaling CoolStep. The magnetic SensOstep encoder provides safe step-loss detection even in stand still.

TMCM-1240 embeds advanced motor control functions, motion control and PLC features like all other TMCM modules. Host communication is possible via the RS485 or CAN interface using TMCL or the optional CANopen protocol. Together with the free and easy to use TMCL-IDE, the module allows for easy implementation of a standalone program flow and remote-controlled operation.

Designed for an operating voltage of +12 to +24V DC nominal at up to 2A RMS phase current resulting in 0.22Nm to 0,7Nm pullout-torque, the new module offers leading-edge current control technologies based on Trinamic’s latest stepper motor driver generation. With Trinamic’s StealthChop current control for silent positioning at low speed and SpreadCycle for highest performance at high speed, the module provides superior performance wherever small stepper motors are used.

An integrated SixPoint ramp generator per axis allows for precise and rapid positioning – even in environments where parameters and target positions must be changed during motion. The module has L+R reference switch inputs for every axis and comes with StallGuard2 for sensorless homing.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...



wholesale jerseys