Microchip: 2D Touch Surface Library easily implements touch pads with surface gestures

Microchip Technology announces a new 2D Touch Surface library that enables designers to easily implement touch pads using the company’s 8-bit PIC and AVR microcontrollers and 32-bit SAM MCUs. Available free of charge with the purchase of any compatible MCU, the library provides a simplified, low-cost solution for embedded applications.

Ideal for implementing small touch pads and screens, the 2D Touch Surface library eliminates costs by running on a device’s existing MCU. This removes the need for a dedicated touch controller, giving product designers the flexibility to add finger position tracking and gesture detection, such as swipes, pinch and zoom, to products. The touch library is provided through Microchip’s code configurators: MPLAB Code Configurator (MCC) for PIC MCUs and Atmel START for AVR and SAM MCUs. Both software tools enable simplified graphical configuration and accelerate development with lean C code tailored for individual project needs. The 2D Touch Surface library is available today on Atmel START and will be available on MCC this quarter.

Intuitive, attractive user interfaces are central to the success of products, and the 2D Touch Surface library eliminates the need to integrate a costly operating system to fulfil consumers’ smartphone-like interface expectations. The library is well suited for adding touch to a variety of applications across consumer electronics, automotive and industrial industries, such as smart speakers, steering wheels or thermostats.

Low-power performance for touch pads is built-in through the library, as complete surfaces are scanned at once while in deep sleep. Reliability is a fundamental requirement for touch, and the solution provides continued responsiveness and functionality through the impact of water and noise, meeting the demands of automotive and home-appliance applications. Implementations operate through wet conditions and can sustain 10V in conducted noise, in alignment with International Electrotechnical Commission (IEC) 61000-4-6 test level 3.

The DM080101 Water Tolerant Touch Surface development kit enables easy evaluation of the 2D Touch Surface library. The kit demonstrates water tolerance and noise immunity on a touch pad and has two touch buttons, all controlled by the same MCU.

The 2D Touch Surface library is available for free with the purchase of any compatible MCU. The DM080101 Water Tolerant Touch Surface development kit is available now for sampling and in volume production.

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


wholesale jerseys