ADI: ±0.5% accurate supervisors target very low voltage components

Analog Devices announces the Power by Linear LTC2962-LTC2964 family of exceptionally accurate 4-channel voltage supervisors for increased system voltage margin and enhanced reliability.  ASIC, FPGA, DSP, MCU and MPU architectures that operate from supplies as low as 1V cannot utilize traditional 1%-2% accurate voltage supervisors without shedding valuable system voltage margin and shrinking the remaining load operating voltage range.  The LTC2962 family possesses a best-in-class ±0.5% reset threshold accuracy, which relaxes power supply demands, increases system tolerance to transients, and enabling a lower nominal supply to dramatically reduce power consumption.  The LTC2962 family fulfills many network, telecom and automotive requirements with its high accuracy, flexible 1V to 5V (or adjustable) reset thresholds, and wide operating temperature range.

A unique feature set differentiates the LTC2962 family in the low power voltage monitor market, making it an excellent choice for many multi-rail applications.  For each channel, one of 16 preset or adjustable, ±0.5% accurate, voltage thresholds can be easily selected for undervoltage, overvoltage or negative monitoring.  The supervisory circuits monitor inputs and drive the outputs according to the configured thresholds.  Alternatively, a manual reset input is also available for optional use of a pushbutton switch to force a system reset.  Ordering options include a watchdog with adjustable timers (LTC2963-1) and individual comparator open-drain outputs for each channel (LTC2964).  An adjustable timeout period is available on all devices. 

The LTC2962 family is available today in multiple temperature grades: 0 to 70°C (C grade), –40 to 85°C (I grade), and –40 to 125°C (H grade).  The LTC2962 is available in a 16-lead 3 x 3mm QFN, while the LTC2963-1 and LTC2964 are available in a 20-lead 3x 4mm QFN.

DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


Microchip demonstrates a flexible motion control platform at electronica

In this video Marcus from Microchip explains a motion control demonstration at their booth at electronica 2018 in Munich, Germany. The demonstration underscores the ability of the solution to rapidly ...


Infineon goes over their latest SiC devices for automotive systems

In this video an Infineon engineer goes over their latest Silicon Carbide (SiC) devices for automotive systems at electronica 2018 in Munich, Germany. Among the devices described are an inverter for a...


Bertrand Lombardo of Honeywell, Sensing requirements of IoT

Bertrand Lombardo, Sales director for EMEA for Honeywell SIOT discusses future sensing trends in relation to IoT at Electronica 2019 with Alix Paultre. Links to more information: Dynamic Hone...


Analog Devices updates their Silent Switcher technology

In this video an FAE from Analog Devices explains the latest version of their Silent Switcher technology, which addresses noise issues in power systems. He describes a live demonstration in their boot...


Western Digital talks about their automotive-grade memory solutions

In this video Martin Booth from Western Digital talks about the company's memory solutions specifically designed for automotive applications and the harsh environments involved. Systems such as ne...


Picotest demonstrates their latest advanced power test solutions

In this video Steve Sandler from Picotest shows us two of the company's latest test solutions at electronica 2018 in Munich, Germany. The first demo is of a micro-Ohm-resolution power rail measure...


STMicro describes their latest smart 48V DC brushless motor driver board

In this video an engineer from STMIcroelectronics explains a motor-driver board setup based on their L9907 smart power device at electronics 2018 in Munich, Germany. Based on BCD-6s technology. the de...


Microchip shows their newest PolarFire FPGAs at electronica 2018

In this video Microchip shows a one of the demos highlighting the capabilities of their newest low-power PolarFire FPGAs at electronica 2018 in Munich, Germany. The demonstration shown here is a kit f...


Western Digital discusses their memory solutions for Cloud-enabled devices

In this video Ze'ev Paas of Western Digital talks to Alix Paultre of Aspencore Media about their latest memory products at electronica 2018 in Munich, Germany. Depending on the application space, ...


Picotest explains a couple of power test systems at electronica 2018

In this video Steve Sandler from Picotest explains a couple of his power test systems at electronica 2018 in Munich, Germany. The first demonstration shows a micro-Ohm measurement system, and the seco...


wholesale jerseys