RTI: connectivity software Connext 6 for healthcare and autonomous systems

At embedded world 2019, Real-Time Innovations will focus on the newest product version of their connectivity software, Connext 6. It is specifically designed for highly autonomous systems with large volumes of data, such as autonomous cars and Healthcare systems.

Connext 6 allows system architects to address key technical challenges in complex autonomous systems, including effective management of high-bandwidth sensor data, simple integration with standardized interfaces, and optimized security, including for safety-critical systems. New features are compatible and interoperable across RTI’s Connext product suite – Connext DDS Secure, Professional, Micro and Cert. Moreover, RTI’s connectivity software, based on the Data Distribution Service (DDS) standard, provides the ability to integrate OPC-UA into DDS systems, and run DDS with the emerging IEEE TSN set of standards

Connext 6 provides a data-centric, interoperable framework that supports all of the operating systems and processor families commonly used by OEMs and their suppliers. RTI’s software supports use of the DDS standard in both the Robotic Operating System (ROS2) and the AUTOSAR Adaptive Platform. The safety-certifiable version, Connext DDS Cert, meets the requirements of ISO 26262 ASIL-D, the automotive functional safety standard. Additionally, Connext 6 includes Connext DDS Secure, the first secure connectivity software designed for real-time control and autonomous applications.

Connext 6 enables healthcare companies to streamline high-bandwidth data connectivity across complex systems, providing new capabilities for sensor fusion applications. Healthcare IoT systems involve transporting and analyzing unprecedented amounts of data in real time while maintaining the reliability and security of a medical-grade network. Connext DDS also provides support for confidentiality, integrity and access control as well as compliance with stringent safety-certification standards. With Connext 6, healthcare companies can efficiently develop next-generation medical systems.

DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


Microchip demonstrates a flexible motion control platform at electronica

In this video Marcus from Microchip explains a motion control demonstration at their booth at electronica 2018 in Munich, Germany. The demonstration underscores the ability of the solution to rapidly ...


Infineon goes over their latest SiC devices for automotive systems

In this video an Infineon engineer goes over their latest Silicon Carbide (SiC) devices for automotive systems at electronica 2018 in Munich, Germany. Among the devices described are an inverter for a...


Bertrand Lombardo of Honeywell, Sensing requirements of IoT

Bertrand Lombardo, Sales director for EMEA for Honeywell SIOT discusses future sensing trends in relation to IoT at Electronica 2019 with Alix Paultre. Links to more information: Dynamic Hone...


Analog Devices updates their Silent Switcher technology

In this video an FAE from Analog Devices explains the latest version of their Silent Switcher technology, which addresses noise issues in power systems. He describes a live demonstration in their boot...


Western Digital talks about their automotive-grade memory solutions

In this video Martin Booth from Western Digital talks about the company's memory solutions specifically designed for automotive applications and the harsh environments involved. Systems such as ne...


Picotest demonstrates their latest advanced power test solutions

In this video Steve Sandler from Picotest shows us two of the company's latest test solutions at electronica 2018 in Munich, Germany. The first demo is of a micro-Ohm-resolution power rail measure...


STMicro describes their latest smart 48V DC brushless motor driver board

In this video an engineer from STMIcroelectronics explains a motor-driver board setup based on their L9907 smart power device at electronics 2018 in Munich, Germany. Based on BCD-6s technology. the de...


Microchip shows their newest PolarFire FPGAs at electronica 2018

In this video Microchip shows a one of the demos highlighting the capabilities of their newest low-power PolarFire FPGAs at electronica 2018 in Munich, Germany. The demonstration shown here is a kit f...


Western Digital discusses their memory solutions for Cloud-enabled devices

In this video Ze'ev Paas of Western Digital talks to Alix Paultre of Aspencore Media about their latest memory products at electronica 2018 in Munich, Germany. Depending on the application space, ...


Picotest explains a couple of power test systems at electronica 2018

In this video Steve Sandler from Picotest explains a couple of his power test systems at electronica 2018 in Munich, Germany. The first demonstration shows a micro-Ohm measurement system, and the seco...


wholesale jerseys