MEMXPRO: PCIe PT33 SSD series to upgrade industrial control systems

MEMXPRO announces availability of its new PT33 SSD series: U.2 PCIe SSD and M.2 2280 PCIe SSD. PT33 series is paired with the latest NVMe 1.3 protocol and uses original quality 3D TLC flash with 10K endurance and longevity support. U.2 PCIe and M.2 2280 PCIe SSDs are up to 3 times faster than SATA SSDs. End-to-end Data Path Protection is used to ensure the integrity of every bit of data as it is transmitted between the host and SSD, and between buffer memories and NAND flash. Enterprise-class reliability and write endurance should also be improved due to the inclusion of the advanced ECC engine. In addition to network communications and server applications, PT33 series is the ideal solution for upgrading and migrating SATA-based systems to better performing PCIe SSDs for the next generation of industrial systems like in-vehicle surveillance, edge devices, and smart platform upgrades. With full channels, the read/write speed of MEMXPRO M.2 280 PCIe and U.2 PCIe are up to 2100/1500MB/s. When booting, downloading software, or transferring large files, the new PCIe SSDs accomplish data transmission quickly and effectively.

Compared to traditional HDD, SSDs come in a variety of product design types and interfaces. MEMXPRO M.2 2280 PCIe and U.2 PCIe PT33 series employ the popular M.2 and U.2 interfaces supporting NVMe 1.3 standard with PCIe 3.0x4 channels. The advantage of M.2 is its compact size, light weight, outstanding performance, commonality, and proliferation; ideal for using in space-conscious server chassis and as industrial control platforms that need more computing and storage resources. The 2.5-inch U.2 PCIe SSD has the performance you would expect from an NVMe device and many servers and storage equipment makers have started to include one or more U.2 slots. U.2 PCIe 2.5” SSDs are able to be installed in drive bays on the front of the host for simple maintenance and do not require any motherboard space. They can be stacked in rows or vertically mounted in one or two drive banks to deliver higher capacity in networking enclosures.

MEMXPRO M.2 280 PCIe and U.2 PCIe PT33 series are equipped with original quality flash chips with 10K endurance and up to 2TB of storage capacity. Advanced PCIe controllers support 3D TLC NAND and with the latest full end-to-end path protection, no error data will be sent to the host. Built-in LDPC (Low Density Parity Check) ECC engine with RAID and SRAM ECC upgrades increase data write stability and product durability, satisfying the requirements of various industrial and embedded applications.

M.2 2280 PCIe and U.2 series can be supervised through MEMXPRO’s mSMART intelligent device monitoring toolbox for disk health status, temperature, lifespan, and read/write speed. For industrial operation, MEMXPRO mSMART 4.0 provides real-time information about when abnormal conditions occur. When it detects high risk conditions, warning notices are given out to remind operators to take preventative action and reduce the maintenance burden and enhancing operational efficiency.

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


wholesale jerseys