DATA MODUL: new generation of PCAP touch analysis tools easyANALYZER 4.0

easyTOUCH is the name of the PCAP/PCT (projective capacitive) touch system for industrial applications developed and produced by DATA MODUL. With this, cover glasses, sensors, displays and controllers are connected with one another and perfectly coordinated. The PCAP system can be optimally parametrised by the touch controller. As a result, it is protected against influences, such as grid bound disruptions. The specifically developed easyTOUCH (USB) controller supports industrial customers with various features throughout the product integration process with integrated DATA MODUL (driverless) firmware.

The Munich-based system solution provider has further developed the easyANALYZER for improved visualisation of a PCAP touch display and its optimal configuration. This support tool is a free program with which the operator can individually define, adjust and change the settings and parameters of their touch display.

With the further developed generation 4.0, DATA MODUL now offers a Europe-wide unique tool, which differentiates and supports two PCAP-controller manufacturers (Microchip and ILITEK) within one item of software. The easyANALYZER 4.0 independently recognises the implemented (USB) controller and the adjusted settings, and enables possible changes, for example the sensitivity (touch threshold) or the definition of the touch event number (finger) etc. by using the documentation. Advantage of the controllers by Microchip or Ilitek is the same look and feel, and the identical Graphical User Interfaces (GUI).

Depending on the project, the pre-parametrised settings must still be adjusted on the easyTOUCH controller. With this tool, it is very easy for application engineers and customers to find the optimal configuration for the touch implementation . After all, it is not always clear at the beginning of a project how the touch system will be integrated and the possible disturbances could occur. With the easyANALYZER 4.0, the settings can be finely tuned independent of the controller and then fixed for the project. In order to facilitate or speed up finetung, the customer can pre-parametrise various scenarios in advance and send them to the DATA MODUL application engineer. The final setting is archived and made available for production. Also new to this version are the revised graphical 3D presentation of debugging data (reference and delta) and the intuitive, dynamic GUI. For optimal operability, this is now customisable.

All in all, the easyANALYZER 4.0 provides the optimal communicative link between the touch system, customer and the application engineer. This connection has a single, common goal: finding the optimal, trouble-free overall solution.

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


wholesale jerseys