Manhattan Skyline: low power, low cost on COM with only 35 x 40mm
The PicoCoreMX6UL module is based on a NXP i.MX 6ULL ARM Cortex-A7 CPU with up to 900MHz and offered with up to 512MB SLC NAND Flash or up to 32GB eMMC, an EEPROM is also on the module. Two 80 poles plug connectors (1,5-4mm board-to-board distance) enable numerous interfaces on the base board. Up to 2x Ethernet, 2x USB, 2x CAN, 4x I2C, 4x SPI, 6x UART, Audio (Line In/ Out/ Mic/ Headphone or I2S), SDIO for SD-Card Slot and others are possible.
The Linux operating system Buildroot and Yocto are supported, drivers were customized and tested for all interfaces. The PicoCore X6UL is available until minimum 2030. More PicoCore modules are under development.